ZTE IMEI flash tool for "IMEI ALL 0" machine

I got this IMEI flash tool from a ZTE user group in China which they use this to fix the IMEI ALL 0 issue for a ZTE N600 machine (confirmed that it is an Android phone)

Provided that u have the original IMEI code written down.

And this flasher will work only for a machine with IMEI ALL 0 only. use this under FTM mode linkage.
Just type in the IMEI code and leave the ESN column to be blanked.
for those who got a new imei generated, the forum provide a fix that u might mess up the imei to all 0 by unplugging the usb cable during the firmware upgrading process..but this sounds too dangerous to try I think so, If anyone try this and work then we probably may have a safety net.

Edit :- I try the flasher by selecting the proper port(mine is COM4) but it keeps saying searching for 10mins but nothing appear.

Use QPST Configuration ZTE Modem :-

here I got another set tools of Qualcomm yet
the QPSt 2.7 build 323 and QXDM Professional 3.12.714

http://hotfile.com/d...ild363.rar.html

http://hotfile.com/d..._winxp.rar.html

install both program and connect the phone with FTM mode

Start QPST >>>> QPST Configuration>>

Select Add Port and it wil bring up another window

select the port with qc diag. press ok .then the port service will be enable.meanwhile, u may backup the ESN data with

"Start clients" >>> "software Download" >>> "backup"

Don't close QPST. and open qxdm professional. setup the communication with the phone by

"option" >>>>"communication"

select "Target port" corresponding to the one u setup in QPST

Then select "View" >>> "Common" >>> "NVBrowser"

goto ID 1992, change the input value from 0 to 1 then click write to change the status.
then type in the command tab : RequestNVItemWrite meid 0xA00000XXXXXXXX that X should be the MEID
from the menu it will bring up the terminal with a success message.
change back the values of ID 1992 in the NV browser. then reboot the phone.
now... the question is I am not sure is about the "X" exact MEID..

I study the QPST program menu and find this :

menu >>>> start client >>>>> service programming > OK

it will bring up an new module session. select "read from phone" on the lower left hand corner.. then I saw this information in the "NAS" tab

for I didn't upgrade to gen2 , I could see a correct IMEI
and there is option of write to the phone, yet it seems to me that some information is missing on that page....
so I dare not try to write the phone...

I believe this software is the correct answer to the IMEI issue
wonder if anyone could manage this tool.

File Download

ZTE IMEI flash tool for "IMEI ALL 0" machine

Use QPST Configuration ZTE Modem :-

You May Like More :-